How to Make a Dresden Plate Pillow

This post was sponsored by Nancy’s Notions. I was compensated in some way for writing this post. Any opinions given are completely my own. For a complete list of disclosure rules see the disclosures page.

How to Make a Dresden Plate Pillow|Designers Sweet Spot|www.designerssweetspot.com

I have admired this Dresden Plate design for quite some time. My friend and I first spotted it at the huge Quilt Expo a couple of years ago. The design template and directions are an easy to use kit from Nancy’s Notions. I was very excited to have a chance to work with Nancy’s Notions on this project, since they are located in my home town here in Wisconsin.

The Dresden Plate kit comes with a plastic template and instruction booklet. You can make any one of a dozen or so different styles by adding different fabrics and sewing variations. I decided to make a pillow version with some patriotic inspired fabrics. The original Dresden Plate design is for a table top decoration, but I decided I would get more use out of a pillow than a table topper. I also decided that larger was better in this case, I used the full size of the template for this project.

Dresden Plate Pillow Supplies:

•3 coordinating cotton fabrics of patriotic design, about 1/2 yard of each red and white strip, blue chambray and navy blue with stars

•Matching Thread, heavy duty

•Poly-fiberfill stuffing, or an old bed pillow

•Quilting Ruler, Cutting Mat and rotary cutter

•Sewing machine

•Iron

•Spray Starch

•Iron on patch in a dark color

•Sewing needle and thread

•Fabric pen or marker

How to Make a Dresden Plate Pillow|Designers Sweet Spot|www.designerssweetspot.com

The red and white Yoyo in the center of this pillow gives it a fun dash of Patriotic color. I can see myself taking the pillow along with my favorite blanket to those summer concerts in the park or to see the fireworks!

Here’s the entire process in a quick video!

Directions:

  1. Iron each fabric to remove wrinkles, matching selvedges and raw edges. Spray with spray starch as you iron to keep the fabric crisp. The starch helps keep the bias cuts from stretching while you are cutting and sewing.
  2. Place the fabric fold edge close to you on a large cutting mat. Measure a 12″ inch strip and cut with a quilting ruler and rotary cutter. Cut 2 strips from each of two fabrics for the pillow top.
  3. Line up the fabric strips on the horizontal. Place the template on the strip, mark the fabric with a fabric pen and cut out with the rotary cutter. This goes faster if you layer your fabric strips. Cut a total of 6 chambray blue and 6 navy blue pieces. For dark printed fabrics it’s easier to mark and cut on the wrong side so you can see your cutting lines.
  4. Cut a 7″ circle in contrasting red and white stripe fabric. (I used a plate to draw my circle).
  5. Lay out the Dresden Plate pieces on the table to view the finished look before sewing.
  6. Sew the pieces together with a stitch length of 2.5 on your sewing machine.
  7. Press seams. Cut a 3″ circle of the iron on patch material and fuse it to the center of the design with the iron. The patch should cover the hole completely. You can also cut a fabric piece for this, but I decided that using a fusible patch was easiest.
  8. Hand stitch a 1/4″ turned seam on the edge of the red and white fabric circle. Using the thread tails, pull up the threads to gather the edges and create the Yoyo circle. Tie off threads and clip ends. Slip stitch in place over the iron on patch.
  9. Place pillow top right side up on red and white contrasting fabric, cut around all edges to make the back of the pillow.
  10. Pin pillow front and back together with WRONG sides together. Stitch around outside edge with a blanket stitch or zigzag stitch. (I like the home spun look this gives the pillow.) Leave a 6-8″ opening to insert the stuffing.
  11. Stuff the pillow with poly fiberfill stuffing. If you are using an old bed pillow, cut away the pillow casing. Pull apart used fiberfill and fluff. Then insert the used fiberfill into the new pillow. Be sure to stuff all the “petal edges” around the pillow.
  12. Slip the opening back under the sewing machine foot and sew closed with the same stitch as before.

How to Make a Dresden Plate Pillow|Designers Sweet Spot|www.designerssweetspot.com

The back of the pillow is also red and white stripe. I forgot to take photos of that. Oh, well. More tomorrow! Thanks to Nancy’s Notions for sponsoring this post!

If you enjoyed this sewing project you might also enjoy these posts:

Kids Travel Pillow

Wool Wave Pillow

How to Sew A Coffee Bean Bag Pillow

Make an Ugly Old Tote Bag Look Like New, No Sew!

Tea Towels with Appliqué

Join the Sewing Community

Subscribe to get FREE Learn to Sew Worksheets.

Powered by ConvertKit

One thought on “How to Make a Dresden Plate Pillow

Leave a Reply

Your email address will not be published. Required fields are marked *